Eşyalarını Tamir Et Topluluk Mağaza

Motor and Cord Replacement

Giriş

This guide will teach you the inner workings of both the motor and cord. You will need to know how to use a screwdriver as well as pliers. Make sure to familiarize yourself with the basics of crimping.

Neye ihtiyacın var

  1. Motor and Cord Replacement, The Motor and Cord: adım 1, 1 resimden 1.

    • Remove the highlighted screws shown with a Phillips #2 Screwdriver.

    Düzenle

  2. Motor and Cord Replacement: adım 2, 1 resimden 1.

    • Remove the motor from the motor mounting plate. Pull the motor and cord to the side.

    Düzenle

  3. Motor and Cord Replacement: adım 3, 1 resimden 1.

    • Use pliers to grip the crimp.

    Düzenle

  5. Motor and Cord Replacement: adım 4, 1 resimden 1.

    • Open the crimp by pressing it opposite to how the crimp was pressed. Repeat for second crimp.

    Düzenle

  6. Motor and Cord Replacement: adım 5, 1 resimden 1.

    • Remove the crimps from the wires by pulling them off.

    Düzenle

  7. Motor and Cord Replacement: adım 6, 1 resimden 1.

    • Untwist the brown and the silver wire by gripping the tip and unwinding them. Do the same for the second wire.

    Düzenle

  8. Motor and Cord Replacement: adım 7, 1 resimden 1.

    • Separate the cord and motor.

    • Now, depending on whether the cord or the motor was broken, head to the device page to order a new one.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Kamal Taha

Üyelik tarihi: 08/27/15

679 İtibar

5 adet Kılavuz yazıldı

Rozetler: 16

+13 tane daha rozet

Ekip

USF Tampa, Team 1-3, Sullivan Fall 2015 USF Tampa, Team 1-3, Sullivan Fall 2015 üyesi

USFT-SULLIVAN-F15S1G3

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 8

Her zaman: 3,079