Giriş

The glass covering on mobile devices can be prone to damage and constant wear and tear. The Motorola Adventure V750 has a very moderate process in replacing the front protection screen.

Parçalar

Hiçbir parçaya gerek yok.

    • Remove the back cover and battery of the Motorola Adventure V750.

    • Remove four screws that are visible using a screwdriver.

    • After removing the battery chamber, you can unclip one of the ribbons that connect the screen to the main body of the phone. This divides the phone into two halves.

  1. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
    • Remove two screws located at the bottom of the main display.

    • Now the display(screen) can be removed by sliding a sharp object or fingernail along the edge of the housing. This releases the clip attached to the screen.

    • Release the display up to the point where you see two metal parts (left and right of the Motorola text). The top part of the display is held on with double sided tape.

    • Gently unstick the tape and remove the display. Be careful not to bend this part.

    • Carefully install the new glass.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Kyle

Üyelik tarihi: 01-10-2012

572 İtibar

5 adet Kılavuz yazıldı

Takım

University of Maine, Team 1-2, Diaz Fall 2012 University of Maine, Team 1-2, Diaz Fall 2012 üyesi

UMAINE-DIAZ-F12S1G2

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 560