Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Motorola Droid Turbo Midframe Replacement

Neye ihtiyacın var

  1. Motorola Droid Turbo Midframe Replacement, Rear Case: adım 1, 1 resimden 1.
    • Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.

  2. Motorola Droid Turbo Midframe Replacement: adım 2, 2 resimden 1. Motorola Droid Turbo Midframe Replacement: adım 2, 2 resimden 2.
    • Use a plastic opening tool to pry the rear case off of the rest of the device.

    • Remove the rear case.

    • The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.

  3. Motorola Droid Turbo Midframe Replacement, Midframe: adım 3, 1 resimden 1.
    • Remove the midframe bezel.

  4. Motorola Droid Turbo Midframe Replacement: adım 4, 1 resimden 1.
    • Remove the four Torx T5 screws securing the midframe plate.

  5. Motorola Droid Turbo Midframe Replacement: adım 5, 1 resimden 1.
    • Remove the midframe.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Geoff Wacker

Üyelik tarihi: 09/30/13

89.849 İtibar

89 adet Kılavuz yazıldı

Bir Yorum

Which circuits depend of the midframe?

gabriel.mourasant - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 1,167