Parçalar

Hiçbir parçaya gerek yok.

  1. Objective: remove the rear case from the Motorola Droid X phone.
    • Objective: remove the rear case from the Motorola Droid X phone.

      • This is what the Motorola Droid X looks like before disassembly. In the front, there is a large LCD touch screen.

    Yorum Ekle

  2. INSTRUCTION: Turn the phone over so that the back faces up.
    • INSTRUCTION: Turn the phone over so that the back faces up.

    Yorum Ekle

    • Objective: remove the battery casing plate.

      • The case plate has a push and slide mechanism.

    Yorum Ekle

    • INSTRUCTION 1: Push on the upper side of the casing located under the camera lens.

    • INSTRUCTION 2: Slide down the battery case plate.

    Yorum Ekle

    • INSTRUCTION: Insert your finger tips into the edges of the opening and pull the casing off.

    Yorum Ekle

    • Objective: remove the battery from the battery compartment.

    Yorum Ekle

    • INSTRUCTION: Grab the red tab that says "Battery Release" and slowly lift it up. This will remove the battery.

    Yorum Ekle

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Objective: remove two small black screws from the back of the phone.

      • These two (2) screws help hold the phone together. They need to be removed by a Phillips Hex 2mm screwdriver,

    Yorum Ekle

    • INSTRUCTION: Remove two black screws from the back of the phone.

    Yorum Ekle

    • Objective: remove the two plastic pieces in front of the phone - they cover the remaining screws.

      • The two plastic pieces are clipped onto the phone as covers. They are located at the top and the bottom of the phone.

    Yorum Ekle

    • INSTRUCTION: Flip the phone over to the front side.

    Yorum Ekle

    • INSTRUCTION: Use the iFixit tool as a crowbar to pry the top plastic cover piece off of the phone. It will pop off.

    Yorum Ekle

    • INSTRUCTION: Use the iFixit tool as a crowbar to pry the bottom plastic piece off the phone.

    Yorum Ekle

    • Objective: remove four white screws from the corners of the screen.

      • These four (4) screws help hold the phone together. Use a Phillips Hex 2mm screwdriver

    Yorum Ekle

    • INSTRUCTION: remove the 2 white screws from the upper corners of the screen.

    Yorum Ekle

    • INSTRUCTION: remove the 2 white screws from the lower corners of the screen.

    Yorum Ekle

    • Objective: remove the rear case from the phone in order to provide access to inside the phone.

      • The phone is now held together by the casing alone. You need to pop the two halves apart.

    Yorum Ekle

    • INSTRUCTION: Use the iFixit tool like a crowbar to pry apart the front and rear halves of the casing. They will pop apart.

    Yorum Ekle

    • Now you are ready to access the internal circuits of the phone.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Anna

Üyelik tarihi: 08-10-2012

28 İtibar

1 Kılavuz yazıldı

Takım

Ohio State, Team 1-1, Voss Fall 2012 Ohio State, Team 1-1, Voss Fall 2012 üyesi

OSU-VOSS-F12S1G1

3 Üyeler

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 675