Eşyalarını Tamir Et Topluluk Mağaza

Motorola Moto 360 3rd Gen Lower Case Replacement

Giriş

Use this guide to replace the lower case on your Motorola Moto 360 3rd Gen smartwatch.

Neye ihtiyacın var

  1. Motorola Moto 360 3rd Gen Lower Case Replacement, Lower Case: adım 1, 2 resimden 1. Motorola Moto 360 3rd Gen Lower Case Replacement, Lower Case: adım 1, 2 resimden 2.

    • Use a T4 Torx screwdriver to remove the four 4.2 mm screws securing the lower case.

    • Gently pry the case open with a halberd spudger if the case will not release after removing the bolts.

    • Do not remove the lower case completely yet; this could damage cables connected to the lower case.

    Düzenle

  3. Motorola Moto 360 3rd Gen Lower Case Replacement: adım 2, 1 resimden 1.

    • Raise the cover without straining the connected ribbon cable.

    • Disconnect the ribbon cable from the motherboard with a halberd spudger.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

Connor Bassolino

Üyelik tarihi: 03/29/22

6.655 İtibar

28 adet Kılavuz yazıldı

Rozetler: 24

+21 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

136 Üyeler

17.420 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 58