Eşyalarını Tamir Et Topluluk Mağaza

Motorola Moto 360 3rd Gen Watch Band Replacement

Giriş

The Motorola Moto 360 3rd Gen Smartwatch watch band can easily be replaced. Follow this guide if your watch band has either been broken or you want to switch out the band’s color.


  1. Motorola Moto 360 3rd Gen Watch Band Replacement, Watch Band: adım 1, 1 resimden 1.

    • Flip the watch so that the bottom is facing toward you.

    Düzenle

  3. Motorola Moto 360 3rd Gen Watch Band Replacement: adım 2, 3 resimden 1. Motorola Moto 360 3rd Gen Watch Band Replacement: adım 2, 3 resimden 2. Motorola Moto 360 3rd Gen Watch Band Replacement: adım 2, 3 resimden 3.

    • Using your finger, press down on the small pin ball until the pin is decompressed.

    • Slide the pin out of place.

    • Pull the pin out of the opposite side and remove the watchband.

    Düzenle

  4. Motorola Moto 360 3rd Gen Watch Band Replacement: adım 3, 1 resimden 1.

    • Repeat the previous step to remove the other side of the watchband.

    Düzenle
Sonuç

To put new bands in, follow these steps in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 64