Ana içeriğe geç

Videoya Genel Bakış

  1. Remove SIM card tray. Remove SIM card tray. Remove SIM card tray.
    • Remove SIM card tray.

  2. Insert the eject pin into the hole in the SIM card tray port and push the back cover with effort to open a gap. Place the guitar pick into the gap. Place the guitar pick into the gap.
    • Insert the eject pin into the hole in the SIM card tray port and push the back cover with effort to open a gap.

    • Place the guitar pick into the gap.

  3. Slide the guitar pick to cut the adhesive sticker under the back cover. It's a little strong. At last, peel off the soft back cover.If you get the new back cover without the logo ring, you need to remove the logo ring from old back cover.
    • Slide the guitar pick to cut the adhesive sticker under the back cover. It's a little strong.

    • At last, peel off the soft back cover.If you get the new back cover without the logo ring, you need to remove the logo ring from old back cover.

Sonuç

To reassemble your device, follow these instructions in reverse order.

18 farklı kişi bu kılavuzu tamamladı.

Sophia

Üyelik tarihi: 25-03-2014

42.291 İtibar

62 adet Kılavuz yazıldı

3 Comments

The guide was easy to follow. I managed to complete it successfully using the recommended tools.

Hassan Almarzooq - Yanıt

It seems that material and time alters the ease with which it opens. My bamboo cover, which has been my precious back cover, was very hard to remove. Probably temperature has affected the glue, that glued it on even more. I needed a scalpel to give me leverage enough, since the eject pin wasn't strong enough to pry it open.

Danni Naeil - Yanıt

What type of adhesive do you use to reseal the back cover?

sfcvickers - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 28

Her zaman: 25,426