Remove the back cover by sliding the clip and lifting up the bottom of the cover.
  • Remove the back cover by sliding the clip and lifting up the bottom of the cover.

Yorum Ekle

Remove screws 1 through 4.
  • Remove screws 1 through 4.

Yorum Ekle

  • Once all four screws are removed, you should be able to pop off the back half of the phone.

Yorum Ekle

  • Flip the logic board up to reveal the back of the keypad.

Yorum Ekle

  • Peal the back of the keypad off of the phone. (Highlighted area are the parts where you can begin to peal from). That white pad is what is being replaced.

Yorum Ekle

  • Take your new key pad and line the holes up with the pegs sticking out of the phone. (Pegs are highlighted).

  • Secure the rest of the key pad.

Yorum Ekle

  • Put the logic board back into place and reattach cable number 1.

Yorum Ekle

  • Snap the front and back of the phone back together and reinsert screws 1 through 4.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Danielle Matthews

Üyelik tarihi: 17-10-2014

13 İtibar

3 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team 6-7, Vijaybhaskar Fall 2014 UMass Dartmouth, Team 6-7, Vijaybhaskar Fall 2014 üyesi

UMASSD-VIJAYBHASKAR-F14S6G7

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 61