Giriş

This guide outlines the steps to disassemble the Q Global to access the internal speakers. It can be used to replace or repair a damaged speaker.

Parçalar

Hiçbir parçaya gerek yok.

  1. Turn the phone face down.
    • Turn the phone face down.

    • Press and hold the release button in the middle of the back panel.

    • Slide the bottom panel down to remove.

    Yorum Ekle

  2. Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.
    • Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.

    • When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.

    Yorum Ekle

    • Press inwardly on the upper casing until it pops out of the phone.

    Yorum Ekle

    • Slide the upper case rightward and lift up.

    • Lift the camera sticker so that it does not get damaged.

    Yorum Ekle

    • Remove the six labeled screws with a T5 torx screw driver.

    Yorum Ekle

    • Once the screws are removed, use the plastic opening tool to remove the black casing.

    Yorum Ekle

    • Remove the speakers by using the plastic remover tool.

    Yorum Ekle

    • Insert the new speakers by gently pressing them down into place.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Carlos De La Parra

Üyelik tarihi: 05-10-2012

14 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 6-31, Regan Fall 2012 Cal Poly, Team 6-31, Regan Fall 2012 üyesi

CPSU-REGAN-F12S6G31

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 540