1. When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.
    • When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.

  2. Turn the phone face-down. Remove the back cover, exposing the battery.
    • Turn the phone face-down. Remove the back cover, exposing the battery.

    • Use the Plastic Opening Tool to pry the battery out of the phone.

  3. Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.
    • Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.

    • Although the battery is shown in this picture, please remember to make sure that it is removed in order to proceed with disassembly.

  4. After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.
    • After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.

  5. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  6. Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.
    • Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.

  7. On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.
    • On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.

  8. You should now have all of the pieces separated and disassembled for your device.
    • You should now have all of the pieces separated and disassembled for your device.

  9. complete dissassembly as instructed by guide
    • complete dissassembly as instructed by guide

  10. Remove camera piece from casing
    • Remove camera piece from casing

  11. replace with new camera piece into casing and reassemble by reversing dissemble procedure
    • replace with new camera piece into casing and reassemble by reversing dissemble procedure

Sonuç

To reassemble your device, follow these instructions in reverse order.

Rich

Üyelik tarihi: 08-04-2013

125 İtibar

6 adet Kılavuz yazıldı

Takım

SUNY Cortland, Team 1-4, Getto Spring 2013 SUNY Cortland, Team 1-4, Getto Spring 2013 üyesi

SUNYCORT-GETTO-S13S1G4

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 131