Giriş

Guide to installing a new camera.

Parçalar

Hiçbir parçaya gerek yok.

Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone. Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone.
  • Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone.

Yorum Ekle

Tilt the battery by lifting at the exposed notch. Slide the battery out of its casing.
  • Tilt the battery by lifting at the exposed notch.

  • Slide the battery out of its casing.

Yorum Ekle

Use a T4 screwdriver to unscrew all six of the .216 inch screws that attach the housing to the case.
  • Use a T4 screwdriver to unscrew all six of the .216 inch screws that attach the housing to the case.

Yorum Ekle

Use a plastic opening tool to lift the plastic casing. Pull the plastic casing directly away from the phone.
  • Use a plastic opening tool to lift the plastic casing.

  • Pull the plastic casing directly away from the phone.

Yorum Ekle

Lift the black rubber loudspeaker housing up and out of the plastic casing.
  • Lift the black rubber loudspeaker housing up and out of the plastic casing.

Yorum Ekle

Use a plastic opening tool to gently lift up the SIM card reader, located above the rubber antenna casing. You should hear a click as it releases. Caution: Remove carefully, if broken, the phone will not be able to make calls.
  • Use a plastic opening tool to gently lift up the SIM card reader, located above the rubber antenna casing. You should hear a click as it releases.

  • Caution: Remove carefully, if broken, the phone will not be able to make calls.

Yorum Ekle

Use a plastic opening tool to pry the two ribbon cable connectors, unclipping them from their sockets on the motherboard. Caution: Remove carefully, if broken, the phone will not function properly.
  • Use a plastic opening tool to pry the two ribbon cable connectors, unclipping them from their sockets on the motherboard.

  • Caution: Remove carefully, if broken, the phone will not function properly.

Yorum Ekle

Use a plastic opening tool to gently pry the motherboard up until you can tilt it with your fingers. Unhook it from the casing and slowly pull it out. Caution: Do this gently Unclipping too fast may cause damage to your phone.
  • Use a plastic opening tool to gently pry the motherboard up until you can tilt it with your fingers. Unhook it from the casing and slowly pull it out.

  • Caution: Do this gently Unclipping too fast may cause damage to your phone.

Yorum Ekle

Turn the phone to the front.
  • Turn the phone to the front.

  • Push the keypad out through the plastic casing.

Yorum Ekle

Turn the phone to the side.
  • Turn the phone to the side.

  • Thread the hinges of the slider through their holes in the casing and pull the slider down and away from the casing.

Yorum Ekle

Slip the plastic opening tool carefully between the camera and the plastic casing.
  • Slip the plastic opening tool carefully between the camera and the plastic casing.

  • Gently pry the camera unit loose, being mindful of the adhesive that holds it in place and the copper colored ribbons that are attached to it.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Andrew Vu

Üyelik tarihi: 07-10-2011

35 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 5-34, Amido Fall 2011 Cal Poly, Team 5-34, Amido Fall 2011 üyesi

CPSU-AMIDO-F11S5G34

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 4

Her zaman: 516