Ana içeriğe geç

Motorola RIZR Z3 Motherboard Replacement

Neye ihtiyacın var

  1. Motorola RIZR Z3 Motherboard Replacement, Battery: adım 1, 2 resimden 1. Motorola RIZR Z3 Motherboard Replacement, Battery: adım 1, 2 resimden 2.
    • Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone.

  2. Motorola RIZR Z3 Motherboard Replacement: adım 2, 2 resimden 1. Motorola RIZR Z3 Motherboard Replacement: adım 2, 2 resimden 2.
    • Tilt the battery by lifting at the exposed notch.

    • Slide the battery out of its casing.

  3. Motorola RIZR Z3 Motherboard Replacement, Motherboard: adım 3, 1 resimden 1.
    • Use a T4 screwdriver to unscrew all six of the .216 inch screws that attach the housing to the case.

  4. Motorola RIZR Z3 Motherboard Replacement: adım 4, 2 resimden 1. Motorola RIZR Z3 Motherboard Replacement: adım 4, 2 resimden 2.
    • Use a plastic opening tool to lift the plastic casing.

    • Pull the plastic casing directly away from the phone.

  5. Motorola RIZR Z3 Motherboard Replacement: adım 5, 1 resimden 1.
    • Lift the black rubber loudspeaker housing up and out of the plastic casing.

  6. Motorola RIZR Z3 Motherboard Replacement: adım 6, 2 resimden 1. Motorola RIZR Z3 Motherboard Replacement: adım 6, 2 resimden 2.
    • Use a plastic opening tool to gently lift up the SIM card reader, located above the rubber antenna casing. You should hear a click as it releases.

    • Caution: Remove carefully, if broken, the phone will not be able to make calls.

  7. Motorola RIZR Z3 Motherboard Replacement: adım 7, 2 resimden 1. Motorola RIZR Z3 Motherboard Replacement: adım 7, 2 resimden 2.
    • Use a plastic opening tool to pry the two ribbon cable connectors, unclipping them from their sockets on the motherboard.

    • Caution: Remove carefully, if broken, the phone will not function properly.

  8. Motorola RIZR Z3 Motherboard Replacement: adım 8, 2 resimden 1. Motorola RIZR Z3 Motherboard Replacement: adım 8, 2 resimden 2.
    • Use a plastic opening tool to gently pry the motherboard up until you can tilt it with your fingers. Unhook it from the casing and slowly pull it out.

    • Caution: Do this gently Unclipping too fast may cause damage to your phone.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Andrew Brock

Üyelik tarihi: 10/07/11

8 İtibar

1 Kılavuz yazıldı

Ekip

Cal Poly, Team 5-34, Amido Fall 2011 Cal Poly, Team 5-34, Amido Fall 2011 üyesi

CPSU-AMIDO-F11S5G34

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 8

Son 30 gün: 13

Her zaman: 1,333