Eşyalarını Tamir Et Topluluk Mağaza

Motorola RIZR Z3 Screen Replacement

Giriş

Guide to installing a new screen.

Neye ihtiyacın var

  1. Motorola RIZR Z3 Screen Replacement, Battery: adım 1, 2 resimden 1. Motorola RIZR Z3 Screen Replacement, Battery: adım 1, 2 resimden 2.

    • Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone.

    Düzenle

  2. Motorola RIZR Z3 Screen Replacement: adım 2, 2 resimden 1. Motorola RIZR Z3 Screen Replacement: adım 2, 2 resimden 2.

    • Tilt the battery by lifting at the exposed notch.

    • Slide the battery out of its casing.

    Düzenle

  3. Motorola RIZR Z3 Screen Replacement, Motherboard: adım 3, 1 resimden 1.

    • Use a T4 screwdriver to unscrew all six of the .216 inch screws that attach the housing to the case.

    Düzenle

  4. Motorola RIZR Z3 Screen Replacement: adım 4, 2 resimden 1. Motorola RIZR Z3 Screen Replacement: adım 4, 2 resimden 2.

    • Use a plastic opening tool to lift the plastic casing.

    • Pull the plastic casing directly away from the phone.

    Düzenle

  5. Motorola RIZR Z3 Screen Replacement: adım 5, 1 resimden 1.

    • Lift the black rubber loudspeaker housing up and out of the plastic casing.

    Düzenle

  7. Motorola RIZR Z3 Screen Replacement: adım 6, 2 resimden 1. Motorola RIZR Z3 Screen Replacement: adım 6, 2 resimden 2.

    • Use a plastic opening tool to gently lift up the SIM card reader, located above the rubber antenna casing. You should hear a click as it releases.

    • Caution: Remove carefully, if broken, the phone will not be able to make calls.

    Düzenle

  8. Motorola RIZR Z3 Screen Replacement: adım 7, 2 resimden 1. Motorola RIZR Z3 Screen Replacement: adım 7, 2 resimden 2.

    • Use a plastic opening tool to pry the two ribbon cable connectors, unclipping them from their sockets on the motherboard.

    • Caution: Remove carefully, if broken, the phone will not function properly.

    Düzenle

  9. Motorola RIZR Z3 Screen Replacement: adım 8, 2 resimden 1. Motorola RIZR Z3 Screen Replacement: adım 8, 2 resimden 2.

    • Use a plastic opening tool to gently pry the motherboard up until you can tilt it with your fingers. Unhook it from the casing and slowly pull it out.

    • Caution: Do this gently Unclipping too fast may cause damage to your phone.

    Düzenle

  10. Motorola RIZR Z3 Screen Replacement, Screen: adım 9, 1 resimden 1.

    • Turn the phone to the front.

    • Push the keypad out through the plastic casing.

    Düzenle

  11. Motorola RIZR Z3 Screen Replacement: adım 10, 1 resimden 1.

    • Turn the phone to the side.

    • Thread the hinges of the slider through their holes in the casing and pull the slider down and away from the casing.

    Düzenle

  12. Motorola RIZR Z3 Screen Replacement: adım 11, 1 resimden 1.

    • Use a T4 screwdriver to unscrew the two .15 inch screws holding the LCD to the faceplate.

    Düzenle

  13. Motorola RIZR Z3 Screen Replacement: adım 12, 3 resimden 1. Motorola RIZR Z3 Screen Replacement: adım 12, 3 resimden 2. Motorola RIZR Z3 Screen Replacement: adım 12, 3 resimden 3.

    • Use a spudger to pry the plastic screen casing partially up from the LCD unit.

    • Use the spudger to pry the ribbon cable away from its clip on the LCD unit.

    • Caution: If the LCD will not function properly if this ribbon cable is broken.

    • Pull the plastic screen casing directly away from the LCD unit.

    Düzenle

  14. Motorola RIZR Z3 Screen Replacement: adım 13, 1 resimden 1.

    • Turn the plastic screen casing over.

    • Carefully use a spudger to push the on the two clips holding the navigational pad in place.

    • You may have to pry the pad away from the plastic screen casing with the spudger.

    Düzenle

  15. Motorola RIZR Z3 Screen Replacement: adım 14, 2 resimden 1. Motorola RIZR Z3 Screen Replacement: adım 14, 2 resimden 2.

    • Use a plastic opening tool to pry the screen up, being mindful of the glue holding the screen to its casing.

    • Pull the screen directly away from the casing.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

5 tane daha katılımcı ile

Brooke Shuford

Üyelik tarihi: 10/10/11

65 İtibar

3 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

Cal Poly, Team 5-34, Amido Fall 2011 Cal Poly, Team 5-34, Amido Fall 2011 üyesi

CPSU-AMIDO-F11S5G34

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 10

Son 30 gün: 13

Her zaman: 1,365