Giriş

This guide will show you how to remove and replace the camera for a Motorola V3c.

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove the four rubber pieces from all corners of the area that borders the screen.
    • Remove the four rubber pieces from all corners of the area that borders the screen.

    Yorum Ekle

  2. Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.
    • Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.

    • Be sure that you do not strip or damage the screws.

    Yorum Ekle

    • Carefully pry the screen away from the phone using a plastic spudger.

    • Pry slowly, as too much bending will crack the screen. There are also two fragile ribbon cables that connect the screen and camera to the phone.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Take the screen housing off of the casing.

    • Watch for small pieces falling out of the screen during this step. Keep track of these pieces.

    Yorum Ekle

    • Pry screen cover off with plastic spudger.

    • The screen cover has some adhesive holding it to the screen

    Yorum Ekle

    • Remove small black sticker covering the camera ribbon connector.

    Yorum Ekle

    • Flip over small hinge that covers the camera ribbon connection.

    Yorum Ekle

    • Pull off the rubber camera cover and camera.

    • The camera and camera cover may come off either separately or together.

    Yorum Ekle

Bitiş Çizgisi

Joshua Ruehlig

Üyelik tarihi: 14-01-2010

503 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 11-4, Forte Winter 2010 Cal Poly, Team 11-4, Forte Winter 2010 üyesi

CPSU-FORTE-W10S11G4

3 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 1

Son 30 Gün: 3

Her zaman: 4,372