Giriş

The outer housing can be removed to be cleaned or swapped to a custom housing.

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove the rearmost panel by pushing down on the silver button, then simultaneously pulling downward on the panel.
    • Remove the rearmost panel by pushing down on the silver button, then simultaneously pulling downward on the panel.

    • Lift the panel off of the phone.

    Yorum Ekle

  2. Using your thumbnail or a thin flat head screwdriver, peel back the screen protector on the inside of the phone: It is only held on by glue but may take a good amount of force to be removed.
    • Using your thumbnail or a thin flat head screwdriver, peel back the screen protector on the inside of the phone: It is only held on by glue but may take a good amount of force to be removed.

    Yorum Ekle

    • Unscrew the four screws using the T6 Torx Screwdriver.

    Yorum Ekle

    • Peel back the screen protector frame. Close phone at the hinge, then pull off the front outer casing.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Minh Tran

Üyelik tarihi: 15-01-2010

2 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 4-15, Forte Winter 2010 Cal Poly, Team 4-15, Forte Winter 2010 üyesi

CPSU-FORTE-W10S4G15

5 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 2,029