Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Step-by-step guide to replacing the keypad sensor.

Parçalar

Hiçbir parça belirtilmedi.

  1. Flip the phone over so the back cover is facing up. Using either a finger or a spudger, press the button located near the top of the phone by the antenna.
    • Flip the phone over so the back cover is facing up.

    • Using either a finger or a spudger, press the button located near the top of the phone by the antenna.

  2. Pry up the back plate from the phone. Push the button near the bottom of the battery using either your finger or the spudger to release the battery.
    • Pry up the back plate from the phone.

    • Push the button near the bottom of the battery using either your finger or the spudger to release the battery.

  3. Using a T6 Torx screwdriver, remove the four screws from the back of the phone.
    • Using a T6 Torx screwdriver, remove the four screws from the back of the phone.

  4. Simultaneously press the highlighted buttons on both sides of phone. Simultaneously press the highlighted buttons on both sides of phone.
    • Simultaneously press the highlighted buttons on both sides of phone.

  5. Separate the back plate from the rest of phone.
    • Separate the back plate from the rest of phone.

    • Do not pull the wire connecting the front and back plates.

  6. Gently lift logic board from back plate.
    • Gently lift logic board from back plate.

  7. Place logic board on front cover. Unsnap orange wire that connects the logic board to keypad sensor to allow the logic board to move freely.
    • Place logic board on front cover.

    • Unsnap orange wire that connects the logic board to keypad sensor to allow the logic board to move freely.

  8. Once logic board is removed lift the green keypad sensor for the front plate. Once logic board is removed lift the green keypad sensor for the front plate.
    • Once logic board is removed lift the green keypad sensor for the front plate.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Elizabeth OBrien

Üyelik tarihi: 26-04-2010

43 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 30-40, Garner Spring 2010 Cal Poly, Team 30-40, Garner Spring 2010 üyesi

CPSU-GARNER-S10S30G40

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 1,880