Giriş

Once the front name plate and Motorola logo have been removed, the LCD Screen Cover can be accessed as shown in this guide.

Parçalar

Hiçbir parçaya gerek yok.

  1. Slide the cover release button towards the bottom of the phone
    • Slide the cover release button towards the bottom of the phone

    • Once the battery cover pops up, slide the cover towards the top of the phone and lift up.

    Yorum Ekle

  2. Push the battery towards the top of the phone and lift up.
    • Push the battery towards the top of the phone and lift up.

    Yorum Ekle

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Although the lower half of the phone in these images has been disassembled, it is not necessary for removing the LCD screen.

    • With the help of plastic opening tools, remove the i710 name plate and Motorola logo from the backside of the phone.

    • The four screws holding the upper half of the phone together should now be visible.

    Yorum Ekle

    • With a H1.5 screwdriver, unscrew the four H1.5 sized screws from the back of the phone.

    • Flip the phone onto its back and, with the help of a plastic opening tool, remove the metal speaker cover that is above the LCD screen.

    Yorum Ekle

    • Slide a plastic opening tool along the edge of the LCD Screen Cover to separate the cover from the phone casing. Apply a small amount of force towards the cover if necessary.

    • The LCD screen should now be completely separated from the phone.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Carson Meena

Üyelik tarihi: 22-10-2012

16 İtibar

5 adet Kılavuz yazıldı

Takım

Clemson, Team 14-2, Benson Fall 2012 Clemson, Team 14-2, Benson Fall 2012 üyesi

CLEM-BENSON-F12S14G2

4 Üyeler

17 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 310