Ana içeriğe geç

Motorola i90c speaker replacement

Neye ihtiyacın var

  1. Motorola i90c speaker replacement, Battery: adım 1, 3 resimden 1. Motorola i90c speaker replacement, Battery: adım 1, 3 resimden 2. Motorola i90c speaker replacement, Battery: adım 1, 3 resimden 3.
    • Slide the notch downward while pulling the back cover off to remove it.

  2. Motorola i90c speaker replacement: adım 2, 3 resimden 1. Motorola i90c speaker replacement: adım 2, 3 resimden 2. Motorola i90c speaker replacement: adım 2, 3 resimden 3.
    • Use your fingers to push the battery upward from the bottom.

    • Lift upwards to remove the battery.

  3. Motorola i90c speaker replacement, Antenna: adım 3, 2 resimden 1. Motorola i90c speaker replacement, Antenna: adım 3, 2 resimden 2.
    • Unscrew the antenna in a counter-clockwise fashion.

    • Remove the aluminum cover.

  4. Motorola i90c speaker replacement, Disassembling Motorola i90c Internal Backplate: adım 4, 3 resimden 1. Motorola i90c speaker replacement, Disassembling Motorola i90c Internal Backplate: adım 4, 3 resimden 2. Motorola i90c speaker replacement, Disassembling Motorola i90c Internal Backplate: adım 4, 3 resimden 3.
    • Unscrew the 3 screws shown.

    • Lift up the right part of the Nextel logo and unscrew the screw underneath.

  5. Motorola i90c speaker replacement: adım 5, 2 resimden 1. Motorola i90c speaker replacement: adım 5, 2 resimden 2.
    • DO NOT force the cover off as it could damage the ribbon cable!

    • Gently lift the back cover off.

  6. Motorola i90c speaker replacement: adım 6, 3 resimden 1. Motorola i90c speaker replacement: adım 6, 3 resimden 2. Motorola i90c speaker replacement: adım 6, 3 resimden 3.
    • Carefully pry off the connection between the headphone jack and logic board.

  7. Motorola i90c speaker replacement, Speaker System: adım 7, 3 resimden 1. Motorola i90c speaker replacement, Speaker System: adım 7, 3 resimden 2. Motorola i90c speaker replacement, Speaker System: adım 7, 3 resimden 3.
    • Use the prying tools to wedge out the circular part of the speaker system.

    • Carefully pull out the wiring and circuit board attached to the speaker system using a prying tool or tweezers.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Jorge

Üyelik tarihi: 04/14/10

4 İtibar

4 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 29-61, Johann Spring 2010 Cal Poly, Team 29-61, Johann Spring 2010 üyesi

CPSU-JOHANN-S10S29G61

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 1,178