Eşyalarını Tamir Et Topluluk Mağaza

Motorola syn1654A Headphone Speaker Replacement

Giriş

This guide will be helpful for users who are in need of replacing the speakers on their headphones. You will need to know how to solder in order to complete this guide.

Neye ihtiyacın var

  1. Motorola syn1654A Headphone Speaker Replacement, Headphone Speaker: adım 1, 1 resimden 1.

    • Make sure the headphones are off and unplugged from any devices.

    • Remove leather headphone cushion by pulling edge towards middle of headphone.

    • It should slip off the device.

    Düzenle

  2. Motorola syn1654A Headphone Speaker Replacement: adım 2, 1 resimden 1.

    • Carefully peel back foam pad to prevent tearing.

    • It is glued at both the top and bottom.

    Düzenle

  4. Motorola syn1654A Headphone Speaker Replacement: adım 3, 1 resimden 1.

    • Use the T6 torx screwdriver to remove the three screws holding the speaker in place.

    • To avoid stripping screws, be sure to use the right screw bit oriented perpendicular to the face of the screw.

    Düzenle

  5. Motorola syn1654A Headphone Speaker Replacement: adım 4, 1 resimden 1.

    • With the speaker removed from the speaker module, clip the black and white wires on the back of the speaker, as shown.

    • Solder wires onto corresponding pads of replacement speaker.

    • For soldering see the ifixit soldering guide: How To Solder and Desolder Connections

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

6 tane daha katılımcı ile

John Ware

Üyelik tarihi: 02/24/14

325 İtibar

2 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

Michigan Tech, Team 5-1, Lauer Spring 2014 Michigan Tech, Team 5-1, Lauer Spring 2014 üyesi

MTU-LAUER-S14S5G1

2 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 389