Eşyalarını Tamir Et Topluluk Mağaza

Munchkinz Camera Replacement

Giriş

If the camera is not working correctly follow this guide to replace it.

Neye ihtiyacın var

  1. Munchkinz Camera Replacement, Opening Device: adım 1, 1 resimden 1.

    • Insert spudger into the USB Micro slot and pry the case apart.

    • Be careful not to go too deep and bend the prong inside the Micro USB port.

    Düzenle

  2. Munchkinz Camera Replacement, Pry Device Apart: adım 2, 2 resimden 1. Munchkinz Camera Replacement, Pry Device Apart: adım 2, 2 resimden 2.

    • Slide the wide plastic opening tool across the seem, separating it if you can't pry the device open using just the spudger.

    • Gently separate the case so none of the cords inside are disconnected

    Düzenle

  4. Munchkinz Camera Replacement, Separated Device: adım 3, 1 resimden 1.

    • After prying the device apart, it should look like this.

    Düzenle

  5. Munchkinz Camera Replacement, Pry Camera: adım 4, 1 resimden 1.

    • Use the slim plastic opening tool to pry the camera from its initial position.

    Düzenle

  6. Munchkinz Camera Replacement, Disconnect Ribbon: adım 5, 1 resimden 1.

    • Use the precision tweezers to gently disconnect the camera ribbon that is connected to the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

David Wood

Üyelik tarihi: 02/05/15

440 İtibar

4 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

UW Tacoma, Team 3-6, Rose Winter 2015 UW Tacoma, Team 3-6, Rose Winter 2015 üyesi

UWT-ROSE-W15S3G6

3 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 115