Giriş

Batteries power the laser. If the laser is not working, one of the reasons might be the batteries. Follow the steps in this guide to correctly replace the batteries.

Parçalar

Hiçbir parçaya gerek yok.

  1. The batteries are located in the handle of the blaster.
    • The batteries are located in the handle of the blaster.

    • The base plate is held in place with a single phillips head, 8.2 mm screw. Remove this screw and remove the base plate to access the battery compartment.

    Yorum Ekle

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Once the batteries have been removed, you can check to see if they have any charge left in them with a battery tester.
    • Once the batteries have been removed, you can check to see if they have any charge left in them with a battery tester.

    • If they are in fact dead, replace them with standard AA type batteries in the correct orientation.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nicholas Samokyszyn

Üyelik tarihi: 24-02-2014

338 İtibar

3 adet Kılavuz yazıldı

Takım

Michigan Tech, Team 5-8, Lauer Spring 2014 Michigan Tech, Team 5-8, Lauer Spring 2014 üyesi

MTU-LAUER-S14S5G8

3 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 17

Her zaman: 1,616