Eşyalarını Tamir Et Topluluk Mağaza

NABI XD Rear panel Replacement

Giriş

This is the first step when replacing any component in the NABI XD. This guide should be used when fixing any part of your device.

Neye ihtiyacın var

  1. NABI XD Rear panel Replacement, Rear panel: adım 1, 2 resimden 1. NABI XD Rear panel Replacement, Rear panel: adım 1, 2 resimden 2.

    • Use the plastic opening tool at the top left corner seam, then pry the corner apart.

    Düzenle

  3. NABI XD Rear panel Replacement: adım 2, 1 resimden 1.

    • Next slide the plastic opening tool across the sides of the Nabi. It will slowly open.

    • There are small plastic clips that need to be release. Gently apply outwards pressure until the clips give.

    • Go around the NABI XD and separate the rear panel from the device.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Marissa Schiereck

Üyelik tarihi: 09/15/16

638 İtibar

6 adet Kılavuz yazıldı

Rozetler: 13

+10 tane daha rozet

Ekip

USF Tampa, Team 17-2, Blackwell Fall 2016 USF Tampa, Team 17-2, Blackwell Fall 2016 üyesi

USFT-BLACKWELL-F16S17G2

3 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 187