Neye ihtiyacın var
-
-
Remove the red rubber case from the device. This should come off with ease.
-
-
-
-
Place the new camera piece in place of the old and plug its ribbon cable back into the respective slot on the board.
-
Make sure the locking tab on the slot is in its up position before inserting tape.
-
Once the tape is inserted press the locking tab back to its down position to securely fasten the ribbon cable.
-
Neredeyse bitti!
To reassemble your device, follow these instructions in reverse order.
Sonuç
To reassemble your device, follow these instructions in reverse order.