Eşyalarını Tamir Et Topluluk Mağaza

Neato Botvac 65 Top Cover Removal

Giriş

In order to gain access to the components of the robot the top cover needs to be removed.

Neye ihtiyacın var

  1. Neato Botvac 65 Top Cover Removal, Battery: adım 1, 2 resimden 1. Neato Botvac 65 Top Cover Removal, Battery: adım 1, 2 resimden 2.

    • Flip the device upside down.

    • Locate the two (2) 20mm screws on the batttery plate.

    Düzenle

  2. Neato Botvac 65 Top Cover Removal: adım 2, 2 resimden 1. Neato Botvac 65 Top Cover Removal: adım 2, 2 resimden 2.

    • Use the Phillips #1 screwdriver to loosen both screws.

    Düzenle

  3. Neato Botvac 65 Top Cover Removal: adım 3, 1 resimden 1.

    • Remove the battery back plate to reveal the battery.

    Düzenle

  4. Neato Botvac 65 Top Cover Removal: adım 4, 2 resimden 1. Neato Botvac 65 Top Cover Removal: adım 4, 2 resimden 2.

    • Disconnect the current battery by pulling the connector from the base and pushing on the clip.

    Düzenle

  5. Neato Botvac 65 Top Cover Removal, Brush: adım 5, 1 resimden 1.

    • Flip the device upside down.

    Düzenle

  7. Neato Botvac 65 Top Cover Removal: adım 6, 2 resimden 1. Neato Botvac 65 Top Cover Removal: adım 6, 2 resimden 2.

    • Use the screwdriver to take off the four (4) 10mm screws located near the brush which secure the plastic guard.

    Düzenle

  8. Neato Botvac 65 Top Cover Removal: adım 7, 2 resimden 1. Neato Botvac 65 Top Cover Removal: adım 7, 2 resimden 2.

    • Remove the plastic brush guard.

    • Pull off the plastic covering the brush.

    Düzenle

  9. Neato Botvac 65 Top Cover Removal: adım 8, 1 resimden 1.

    • Lift the brush to clean or replace.

    Düzenle

  10. Neato Botvac 65 Top Cover Removal, Top Cover: adım 9, 1 resimden 1.

    • Flip device upside down.

    • Locate the six (6) screw connected to the top cover.

    Düzenle

  11. Neato Botvac 65 Top Cover Removal: adım 10, 1 resimden 1.

    • Remove eight (8) star screws using the T10 bit.

    Düzenle

  12. Neato Botvac 65 Top Cover Removal: adım 11, 2 resimden 1. Neato Botvac 65 Top Cover Removal: adım 11, 2 resimden 2.

    • Pull off one side of the brush front cover, and then pull off the other.

    Düzenle

  13. Neato Botvac 65 Top Cover Removal: adım 12, 1 resimden 1.

    • Flip right side up and turn around.

    • FInd the two clips connecting the top cover to the body of the device.

    Düzenle

  14. Neato Botvac 65 Top Cover Removal: adım 13, 2 resimden 1. Neato Botvac 65 Top Cover Removal: adım 13, 2 resimden 2.

    • Lift up on the top cover gently.

    • Disconnect the connector from the motherboard to detach the top cover from the robot.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Joseph Caton

Üyelik tarihi: 02/15/17

334 İtibar

3 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

USF Tampa, Team S2-G1, Lacy Spring 2017 USF Tampa, Team S2-G1, Lacy Spring 2017 üyesi

USFT-LACY-S17S2G1

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 6

Her zaman: 1,274