Eşyalarını Tamir Et Topluluk Mağaza

Nerf N-Strike Elite Hail-Fire Trigger Replacement

Giriş

Use this guide to replace the spring that connects the trigger with the firing cog.

Neye ihtiyacın var

  1. Nerf N-Strike Elite Hail-Fire Trigger Replacement, Left Shell: adım 1, 3 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement, Left Shell: adım 1, 3 resimden 2. Nerf N-Strike Elite Hail-Fire Trigger Replacement, Left Shell: adım 1, 3 resimden 3.

    • Before disassembling your Nerf Hail-Fire, be sure to remove the batteries.

    • Remove the two 9.0 mm Phillips screws securing the battery compartment.

    • Slide the battery compartment out.

    Düzenle

  2. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 2, 1 resimden 1.

    • Remove the five 9.0 mm Phillips screws securing the trigger.

    Düzenle

  3. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 3, 2 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 3, 2 resimden 2.

    • Remove the single 11.0 mm Phillips screw securing the magazine cartridge chambers.

    • Pull the entire chamber upwards to separate it from the rest of the Nerf Gun.

    Düzenle

  4. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 4, 3 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 4, 3 resimden 2. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 4, 3 resimden 3.

    • Remove both halves of the ring by tugging on it upwards until the lock gets freed.

    • This requires quite a bit of force and if you are not careful, you may break the plastic lock.

    Düzenle

  5. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 5, 1 resimden 1.

    • Remove the four 9.0 mm Phillips screws from the newly revealed cylinder.

    Düzenle

  6. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 6, 1 resimden 1.

    • Remove the three 9.0 mm Phillips screws holding the top latch of the Nerf Gun together.

    Düzenle

  7. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 7, 1 resimden 1.

    • Remove the three 9.0 mm Phillips screws holding together the firing chamber.

    • Remove the single 7.0 mm Phillips screw below the barrel.

    • Remove the two 14.0 mm Philips screws using a screwdriver with a length of approximately 4.0 inches and a diameter of approximately 0.2 cm.

    Düzenle

  8. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 8, 1 resimden 1.

    • Remove the single 14.0 mm Phillips screw holding together the handle and the Nerf Gun.

    Düzenle

  10. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 9, 2 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 9, 2 resimden 2.

    • Remove the two 9.0 mm Phillips screws holding together the handle.

    • Remove the plastic cover of the handle.

    Düzenle

  11. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 10, 2 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 10, 2 resimden 2.

    • Insert one plastic opening tool inside one side of the orange part depicted in the picture.

    • Insert a second plastic opening tool to the other side of the orange part and gradually pull the piece out, freeing it from the handle.

    Düzenle

  12. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 11, 3 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 11, 3 resimden 2. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 11, 3 resimden 3.

    • Pull one end of the handle away from the orange latch.

    • Repeat the procedure on the other side to completely remove the handle from the rest of the Nerf Gun.

    Düzenle

  13. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 12, 3 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 12, 3 resimden 2. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 12, 3 resimden 3.

    • Lift the entire left shell slowly. The process should be easy and if there is any resistance, there is something wrong. You may have forgotten a screw.

    • Completely remove the left shell from the rest of the Nerf Gun.

    Düzenle

  14. Nerf N-Strike Elite Hail-Fire Trigger Replacement, Inner Plastic Components: adım 13, 3 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement, Inner Plastic Components: adım 13, 3 resimden 2. Nerf N-Strike Elite Hail-Fire Trigger Replacement, Inner Plastic Components: adım 13, 3 resimden 3.

    • Remove the cartridge support.

    Düzenle

  15. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 14, 3 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 14, 3 resimden 2. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 14, 3 resimden 3.

    • Remove the handle crank.

    Düzenle

  16. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 15, 2 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 15, 2 resimden 2.

    • Remove the clear plastic barrel cover.

    Düzenle

  17. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 16, 2 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 16, 2 resimden 2.

    • Remove the firing pin.

    Düzenle

  18. Nerf N-Strike Elite Hail-Fire Trigger Replacement, Right Shell: adım 17, 2 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement, Right Shell: adım 17, 2 resimden 2.

    • Lift the trigger mechanism out of the shell.

    • You cannot fully remove the trigger mechanism just yet. However taking it out of the shell helps in later steps.

    Düzenle

  19. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 18, 3 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 18, 3 resimden 2. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 18, 3 resimden 3.

    • Remove the two 9.0 mm Phillips screws.

    Düzenle

  20. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 19, 3 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 19, 3 resimden 2. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 19, 3 resimden 3.

    • To remove the motor and trigger mechanism you have to detach these two wires which are glued to the shell.

    • Hold close to the wire and pull upward slowly.

    • If you pull too quickly you can potentially damage the wire.

    Düzenle

  21. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 20, 2 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 20, 2 resimden 2.

    • Once all the pieces are removed the right shell should be fully accessible.

    Düzenle

  22. Nerf N-Strike Elite Hail-Fire Trigger Replacement, Trigger: adım 21, 3 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement, Trigger: adım 21, 3 resimden 2. Nerf N-Strike Elite Hail-Fire Trigger Replacement, Trigger: adım 21, 3 resimden 3.

    • Remove the single 9.0 mm Phillips screw.

    Düzenle

  23. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 22, 2 resimden 1. Nerf N-Strike Elite Hail-Fire Trigger Replacement: adım 22, 2 resimden 2.

    • Locate the orange bar protruding from the rest of the gun. You should see the spring hooked onto two ends.

    • Push the orange bar until the spring becomes loose.

    • The trigger should come loose right away.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Chris

Üyelik tarihi: 01/24/14

273 İtibar

2 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Cal Poly, Team 13-13, Regan Winter 2014 Cal Poly, Team 13-13, Regan Winter 2014 üyesi

CPSU-REGAN-W14S13G13

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 2,366