Ana içeriğe geç

Nerf N-Strike Maverick Trigger Repair

Neye ihtiyacın var

  1. Nerf N-Strike Maverick Trigger Repair, Nerf N-Strike Maverick Trigger Repair: adım 1, 1 resimden 1.
    • Remove the 10 screws on the outer shell of the Maverick.

    • Make sure to keep all the screws in a cup or container so they don't get lost.

  2. Nerf N-Strike Maverick Trigger Repair: adım 2, 2 resimden 1. Nerf N-Strike Maverick Trigger Repair: adım 2, 2 resimden 2.
    • After removing all of the screws, slowly lift the gray top left piece.

    • The other side of the top left piece can also be taken off.

  3. Nerf N-Strike Maverick Trigger Repair: adım 3, 1 resimden 1.
    • Remove the top left screw.

  4. Nerf N-Strike Maverick Trigger Repair: adım 4, 2 resimden 1. Nerf N-Strike Maverick Trigger Repair: adım 4, 2 resimden 2.
    • While holding the Maverick down slowly lift the outer shell.

    • Make sure the orientation of the Maverick matches the picture shown.

  5. Nerf N-Strike Maverick Trigger Repair: adım 5, 2 resimden 1. Nerf N-Strike Maverick Trigger Repair: adım 5, 2 resimden 2.
    • Remove the screw holding the trigger to the body.

    • When screwing everything back together, remember to re hook the trigger spring.

  6. Nerf N-Strike Maverick Trigger Repair: adım 6, 3 resimden 1. Nerf N-Strike Maverick Trigger Repair: adım 6, 3 resimden 2. Nerf N-Strike Maverick Trigger Repair: adım 6, 3 resimden 3.
    • Check the inner chassis around the trigger area. Make sure the springs and parts can move freely.

    • If a part is broken, a replacement will need to be bought or taken from another Maverick.

  7. Nerf N-Strike Maverick Trigger Repair: adım 7, 2 resimden 1. Nerf N-Strike Maverick Trigger Repair: adım 7, 2 resimden 2.
    • After examining and fixing the chassis, screw the trigger back onto the body.

    • Hook the upper spring to the metal rod.

  8. Nerf N-Strike Maverick Trigger Repair: adım 8, 3 resimden 1. Nerf N-Strike Maverick Trigger Repair: adım 8, 3 resimden 2. Nerf N-Strike Maverick Trigger Repair: adım 8, 3 resimden 3.
    • Replace the outer shell of the Maverick and the top left screw.

    • When reattaching the outer shell, make sure to hold the top left piece as shown in the first picture. This ensures that the spring remains connected to the rod.

    • Screw the top left piece back onto the Maverick.

    • Replace the 10 screws on the Maverick.

Bitiş Çizgisi

Bir başkası bu kılavuzu tamamladı.

David Lim

Üyelik tarihi: 09/27/15

110 İtibar

1 Kılavuz yazıldı

Ekip

Cal Poly, Team 10-3, Green Fall 2015 Cal Poly, Team 10-3, Green Fall 2015 üyesi

CPSU-GREEN-F15S10G3

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 7

Her zaman: 2,194