Ana içeriğe geç
Salt Önkoşul
Salt Önkoşul
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.
Salt Önkoşul

What you need

  1. Nerf Vortex Vigilon Side Cover Disassembly, Removing the outer screws: adım 1, 2 resimden 1. Nerf Vortex Vigilon Side Cover Disassembly, Removing the outer screws: adım 1, 2 resimden 2.
    • Remove the twelve #00 1 cm Phillips screws.

    • Because the holes for the screws are deeper than the screw size, some of the screws may not come out even after you have completely unscrewed them. They will come out when you take off the outside cover in the next step, which is okay.

    • Rotate the gun so that the front is facing you to remove the final screw.

  2. Nerf Vortex Vigilon Side Cover Disassembly, Removing the outside cover: adım 2, 1 resimden 1.
    • When removing the cover, the clip attachment and the spring will likely fall out of the gun.

    • Lift the outside cover off of the gun. Only the side where you removed the screws will come off.

    • The magazine will slide down automatically as you remove the cover.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Cara Pew

Üyelik tarihi: 29-09-2014

911 İtibar

7 adet Kılavuz yazıldı

Team

Cal Poly, Team 13-6, Forte Fall 2014 Cal Poly, Team 13-6, Forte Fall 2014 üyesi

CPSU-FORTE-F14S13G6

5 Üyeler

7 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 35