Ana içeriğe geç

Giriş

If your Nest Hello is losing charge faster than it used to, or refusing to power-on despite troubleshooting, this guide will help you access a faulty battery. The following steps will require the iFixit opening picks, Phillips #000 screwdriver, and tweezers. While removing the faceplate and casing from the device it is easy to damage the waterproofing O-Ring, so plan on replacing that as well.

  1. Nest Hello Battery Replacement, Casing and Faceplate: adım 1, 1 resimden 1.
    • Insert the pick between the black faceplate and white casing of the Nest Hello.

    • Pry the faceplate away from the device with the opening pick.

    • If you have not opened the Nest Hello before, there will be a protective foam mesh that is glued to the plastic covering and the inside of the mesh, use a pick to cut through the mesh as much as possible.

    • Completely remove the faceplate from the device, do not be afraid to pull hard.

  2. Nest Hello Battery Replacement: adım 2, 2 resimden 1. Nest Hello Battery Replacement: adım 2, 2 resimden 2.
    • Peel back the cover stickers and use the Phillips #000 screwdriver to remove the four screws.

  3. Nest Hello Battery Replacement: adım 3, 3 resimden 1. Nest Hello Battery Replacement: adım 3, 3 resimden 2. Nest Hello Battery Replacement: adım 3, 3 resimden 3.
    • Insert opening pick between the white casing and the black internal circuitry and pry it out.

    • There is a ribbon cable connecting the white casing to the circuit boards. Be careful not to tear out the cable while separating the casing from the circuit boards.

  4. Nest Hello Battery Replacement, Motherboard: adım 4, 1 resimden 1.
    • Use the Phillips #000 to remove the two screws holding the ribbon cable to the white casing.

  5. Nest Hello Battery Replacement: adım 5, 2 resimden 1. Nest Hello Battery Replacement: adım 5, 2 resimden 2.
    • Grip the connector with the tweezers as shown and pull it away from the casing.

  6. Nest Hello Battery Replacement: adım 6, 1 resimden 1.
    • Remove the six smaller screws shown with the Phillips #000 screwdriver.

    • Remove the three larger screws shown with the Phillips #000 screwdriver.

  7. Nest Hello Battery Replacement: adım 7, 2 resimden 1. Nest Hello Battery Replacement: adım 7, 2 resimden 2.
    • Holding the device as shown push the circuit board away from you and up to free it from the clips.

  8. Nest Hello Battery Replacement: adım 8, 2 resimden 1. Nest Hello Battery Replacement: adım 8, 2 resimden 2.
    • Use the Phillips #000 screwdriver to remove the three screws holding the last circuit board to the black plastic housing.

  9. Nest Hello Battery Replacement: adım 9, 1 resimden 1.
    • Insert the pick underneath the black connectors and pry them upward to disconnect them from the circuit board.

    • Work your way around the device, prying the circuit board away from the housing.

    • Make sure to feed the wires when taking off the circuit board.

  10. Nest Hello Battery Replacement, Battery: adım 10, 3 resimden 1. Nest Hello Battery Replacement, Battery: adım 10, 3 resimden 2. Nest Hello Battery Replacement, Battery: adım 10, 3 resimden 3.
    • Once the back casing is removed, disconnect the battery cable and remove the battery from the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

17 Comments

Any recommendations as to where we can find a replacement battery? Model #, specs?

Patrick Ouellet - Yanıt

Battery and o-ring part source?

Ryan - Yanıt

What is the replacement battery?

Leon Sparrow - Yanıt

Bonjour, j’ai besoin de changer la batterie.

Merci pour le tuto,

avez vous un liens pour la batterie svp ?

urgent

dessolle.emmanuel - Yanıt

Confirming that this battery being removed is from a WIRED Nest Hello doorbell? Thanks!

Vee Li - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 60

Son 7 gün: 405

Son 30 gün: 1,413

Her zaman: 11,642