Giriş

This guide will allow you to separate the motherboard from the lower case.

Parçalar

Hiçbir parçaya gerek yok.

Rotate the device so that the bottom is facing up.
  • Rotate the device so that the bottom is facing up.

Yorum Ekle

Lift up all four rubber pads on the bottom of the router with the plastic opening tool.
  • Lift up all four rubber pads on the bottom of the router with the plastic opening tool.

  • Be careful not to pull the rubber pads all the way out when lifting as they are difficult to reinsert.

Yorum Ekle

  • Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router.

Yorum Ekle

  • Lift the bottom casing straight up from the router.

Yorum Ekle

  • Remove the clear plastic casing by lifting it straight up from the router.

Yorum Ekle

  • Separate the motherboard from the top shell by lifting it straight up from the router.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Ryan Murphy

Üyelik tarihi: 03-10-2011

482 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 21-24, Maness Fall 2011 Cal Poly, Team 21-24, Maness Fall 2011 üyesi

CPSU-MANESS-F11S21G24

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 15

Her zaman: 1,717