1. Turn the device over so it is upside-down.
    • Turn the device over so it is upside-down.

  2. Unscrew the 4 screws closest to the screen.
    • Unscrew the 4 screws closest to the screen.

  3. Flip over the device so it is right side up.
    • Flip over the device so it is right side up.

  4. Unscrew the 2 screws on the top of the device, next to the docking plug.
    • Unscrew the 2 screws on the top of the device, next to the docking plug.

  5. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  6. Take off top piece by using slight force and pulling off.
    • Take off top piece by using slight force and pulling off.

  7. Unscrew the button board with smaller screwdriver.
    • Unscrew the button board with smaller screwdriver.

  8. Lift off the button board.
    • Lift off the button board.

  9. Unscrew all visible of the screws on the black logic board cover with the larger screwdriver.
    • Unscrew all visible of the screws on the black logic board cover with the larger screwdriver.

  10. Lift the screen vertically straight up.
    • Lift the screen vertically straight up.

    • As you do this the logic board should move off with it.

  11. Flip the screen and the logic board over to the right side.
    • Flip the screen and the logic board over to the right side.

  12. Pull out the white plug that goes from the speakers to the logic board.
    • Pull out the white plug that goes from the speakers to the logic board.

    • Then plug back in making sure it is completely connected.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Michelle Read

Üyelik tarihi: 26-09-2012

1 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 7-50, Forte Fall 2012 Cal Poly, Team 7-50, Forte Fall 2012 üyesi

CPSU-FORTE-F12S7G50

5 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 303