Giriş

This is a relatively easy repair to make to your Q. Follow the prerequisite for removing the inner dome daughterboard to get started.

  1. Squeeze and pull to pop the cap off of the Nexus Q.
    • Squeeze and pull to pop the cap off of the Nexus Q.

    Yorum Ekle

  2. Disconnect the taoglas Wi-Fi Dual Band Antenna by prying with a spudger.
    • Disconnect the taoglas Wi-Fi Dual Band Antenna by prying with a spudger.

    • Once the antenna is disconnected, simply pull it off the outside of the inner dome.

    Why remove the anntenna? what did it do to you?

    rudyt83 - Yanıt

    • Undo the ZIF connector by prying with a spudger.

    Yorum Ekle

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Use a T10 Torx screwdriver to remove the four 1.3 mm screws holding the inner dome in place.

    Yorum Ekle

    • Use a T6 Torx screwdriver to undo the three 0.8 mm screws holding the inner dome daughterboard in place.

    Yorum Ekle

    • Use a spudger to disconnect the daughterboard from the ZIF connector.

    Yorum Ekle

    • Use a spudger to pry out the NFC antenna.

    • The antenna has two layers; be careful not to pry the two layers apart.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Alex Thomas

Üyelik tarihi: 31-01-2013

27 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 7-10, Maness Winter 2013 Cal Poly, Team 7-10, Maness Winter 2013 üyesi

CPSU-MANESS-W13S7G10

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 2

Her zaman: 520