Ana içeriğe geç

Nike+ Sportband Screen Replacement

Neye ihtiyacın var

  1. Nike+ Sportband Screen Replacement, External Case: adım 1, 2 resimden 1. Nike+ Sportband Screen Replacement, External Case: adım 1, 2 resimden 2.
    • To begin the disassembly of your NikePlus Sportband, first remove the device from the rubber wristband.

  2. Nike+ Sportband Screen Replacement: adım 2, 2 resimden 1. Nike+ Sportband Screen Replacement: adım 2, 2 resimden 2.
    • Finish the disassembly of your NikePlus Sportband by utilizing the metal spudger tool on the short edge to pry the external body pieces apart.

  3. Nike+ Sportband Screen Replacement, Screen: adım 3, 2 resimden 1. Nike+ Sportband Screen Replacement, Screen: adım 3, 2 resimden 2.
    • After the cover had been removed, use the metal spudger tool to remove the body of the device from the casing.

  4. Nike+ Sportband Screen Replacement: adım 4, 3 resimden 1. Nike+ Sportband Screen Replacement: adım 4, 3 resimden 2. Nike+ Sportband Screen Replacement: adım 4, 3 resimden 3.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al
    • Use the metal tweezers to pry the screen casing from the body of the device.

    • The screen casing is fastened to the body of the device by four clips located in each corner of the casing.

  5. Nike+ Sportband Screen Replacement: adım 5, 2 resimden 1. Nike+ Sportband Screen Replacement: adım 5, 2 resimden 2.
    • Flip the body of the device over so that the screen is now on the bottom.

    • The display ribbon cable is soldered to the motherboard. We were able to peel up the ribbon cable with a pair of tweezers.

    • Successfully resoldering this ribbon cable to the motherboard may prove difficult to the very small traces.

  6. Nike+ Sportband Screen Replacement: adım 6, 3 resimden 1. Nike+ Sportband Screen Replacement: adım 6, 3 resimden 2. Nike+ Sportband Screen Replacement: adım 6, 3 resimden 3.
    • Flip the body of the device back over so that the screen is facing up.

    • Using the tweezers, gently lift the screen from body of the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Daniel Burtner

Üyelik tarihi: 02/15/16

101 İtibar

1 Kılavuz yazıldı

Ekip

IUPUI, Team 9-9, Wilson Spring 2016 IUPUI, Team 9-9, Wilson Spring 2016 üyesi

IUPUI-WILSON-S16S9G9

5 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 14

Her zaman: 254