Ana içeriğe geç

Nike SportWatch GPS Back Panel Replacement

Neye ihtiyacın var

  1. Nike SportWatch GPS Back Panel Replacement, Back Panel: adım 1, 1 resimden 1.
    • Face the watch upside down, so that the back of the watch is exposed. Unscrew the six #000 size 5 mm long screws on the back using a size 000 Phillips head screwdriver.

  2. Nike SportWatch GPS Back Panel Replacement: adım 2, 1 resimden 1.
    • Carefully separate the watch by pulling the band away from the main board.

  3. Nike SportWatch GPS Back Panel Replacement: adım 3, 1 resimden 1.
    • Pry the black plastic piece above the battery out using a nylon or metal spudger.

    • Be careful not to break the metal flat bands located above the plastic piece. They are fragile and easily breakable.

  4. Nike SportWatch GPS Back Panel Replacement: adım 4, 1 resimden 1.
    • Using a guitar pick removal tool, push under the battery to pry the battery out of the watch.

  5. Nike SportWatch GPS Back Panel Replacement: adım 5, 1 resimden 1.
    • After taking the battery out, you will be left with just the band and the backpanel part of the watch.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Ian Eichorn

Üyelik tarihi: 10/22/15

678 İtibar

4 adet Kılavuz yazıldı

Ekip

UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 üyesi

UMASSD-GULBRANDSEN-F15S5G8

3 Üyeler

5 adet Kılavuz yazıldı

3 Yorum

Where can I find a new watch band?

rhalljr68 - Yanıt

You can´t. Nike left us alone

Leonardo Cartier - Yanıt

So, no way to repair the band then if there's no replacement parts? :(

roycy Tan - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 2,543