Ana içeriğe geç

Nike SportWatch GPS Front Panel Replacement

Neye ihtiyacın var

  1. Nike SportWatch GPS Front Panel Replacement, Front Panel: adım 1, 1 resimden 1.
    • Face the watch upside down so that the back of the watch is exposed. Unscrew the six size #000 5 mm long screws on the back using a size 000 Phillips head screwdriver.

  2. Nike SportWatch GPS Front Panel Replacement: adım 2, 1 resimden 1.
    • Carefully separate the watch by pulling the band away from the main board.

  3. Nike SportWatch GPS Front Panel Replacement: adım 3, 1 resimden 1.
    • Two size #000 2.5 mm long screws will appear at the top of the main board. Unscrew them using a size 000 Phillips head screwdriver.

  4. Nike SportWatch GPS Front Panel Replacement: adım 4, 1 resimden 1.
    • Carefully use the blue plastic opening tool to pry the main board out of the front panel.

    • Make sure to be gentle so the ribbon cable that connects to the band does not break, it is fragile and not removable.

  5. Nike SportWatch GPS Front Panel Replacement: adım 5, 1 resimden 1.
    • Use an iOpener that has been heated in the microwave for about a minute, or until warm. Place it on the front screen of the watch. Let it rest there for a minute.

    • If you are unfamiliar with this tool use the iOpener guide here

  6. Nike SportWatch GPS Front Panel Replacement: adım 6, 1 resimden 1.
    • Push the panel out from the back of the screen, using your fingers.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Ian Eichorn

Üyelik tarihi: 10/22/15

678 İtibar

4 adet Kılavuz yazıldı

Ekip

UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 üyesi

UMASSD-GULBRANDSEN-F15S5G8

3 Üyeler

5 adet Kılavuz yazıldı

Bir Yorum

Where I can find the replacement glass? regards

Erick Sobreiro - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 2

Her zaman: 1,255