1. Remove the screw located near the speaker port using a Phillips 00 screwdriver.
    • Remove the screw located near the speaker port using a Phillips 00 screwdriver.

    Yorum Ekle

  2. Turn camera upside down so that the battery compartment is facing you.
    • Turn camera upside down so that the battery compartment is facing you.

    • Remove all four screws from the bottom of the camera with a Phillips 00 screwdriver.

    Yorum Ekle

    • Rotate the camera to the opposite side where the A/V outlet is located.

    • Unscrew and remove all four screws with a Phillips 00 screwdriver.

    Yorum Ekle

    • Turn the camera so that the Wi-Fi adapter is facing you.

    • Unscrew and remove all four screws with a Phillips 00 screwdriver.

    Yorum Ekle

    • Using a plastic opening tool, pry the front casing of the camera.

    • Continue this motion all around the front casing of the camera.

    • Gently pull apart the front casing from the rest of the camera.

    Yorum Ekle

    • Using the plastic opening tool pry the back casing of the camera.

    Yorum Ekle

    • Orange ribbon is fragile

    • Carefully pull apart the back casing of the camera from the front of the camera without tearing the orange ribbon.

    Yorum Ekle

    • Pull down the on the black latch to carefully separate the orange ribbon from the motherboard.

    • Pull apart the orange ribbon and front casing from the rest of the camera.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Use plastic opening tool to carefully pry the LCD Screen from the camera.

    Yorum Ekle

    • Gently pull the ribbon cable down to release the latch, then pull up to remove it from the motherboard.

    Yorum Ekle

  4. Yorum Ekle

    • Continue by removing two screws from the back of the camera body.

    Yorum Ekle

    • Remove the screw connecting the wifi card cover to the front of the camera.

    Yorum Ekle

    • Remove the final screw connecting the Wifi card cover to the case.

    Yorum Ekle

    • Gently pull the Wifi card cover off of the camera body.

    Yorum Ekle

    • Remove the screw holding the Wifi Card to the camera body.

    Yorum Ekle

    • Gently pull the WiFi card out of the camera.

    Yorum Ekle

    • Continue removing screws from the outside of the camera body.

    • Next pull the plastic side panel off of the camera body.

    • Be extremely careful when holding the camera around the flash capacitor (circled in green), it is probably still charged, and it is very painful if you are shocked by it.

    Yorum Ekle

    • Remove the two screws connecting the strap loop to the camera body.

    • Remove the three screws from the left side of the camera body.

    • Remove the screw by the shutter button.

    Yorum Ekle

    • Remove screws from plastic side cover.

    • Pull off plastic cover.

    Yorum Ekle

    • Carefully remove the back housing body from the camera.

    Yorum Ekle

    • Remove the five screws connecting motherboard to the camera body.

    • Carefully detach the two ribbon cables from the motherboard by releasing the black plastic catch, then pull the cables gently upwards out of the connector.

    Yorum Ekle

    • Carefully de-solder the four connections to the motherboard.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Joshua Avery

Üyelik tarihi: 23-01-2012

19 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 3-28, Amido Winter 2012 Cal Poly, Team 3-28, Amido Winter 2012 üyesi

CPSU-AMIDO-W12S3G28

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 1,177