Eşyalarını Tamir Et Topluluk Mağaza

Nikon COOLPIX P500 Rear Case Replacement

Giriş

This is a guide that demonstrates how to isolate the rear case of your camera from the rest of the device.

Neye ihtiyacın var

  1. Nikon COOLPIX P500 Rear Case Replacement, Battery: adım 1, 2 resimden 1. Nikon COOLPIX P500 Rear Case Replacement, Battery: adım 1, 2 resimden 2.

    • Electric shock is a huge risk if the battery is not removed while taking the camera apart.

    • Press down and forward on the battery cover latch.

    • Push the orange latch, in the direction of the arrow on it, to release the battery.

    Düzenle

  2. Nikon COOLPIX P500 Rear Case Replacement, Rear Case: adım 2, 3 resimden 1. Nikon COOLPIX P500 Rear Case Replacement, Rear Case: adım 2, 3 resimden 2. Nikon COOLPIX P500 Rear Case Replacement, Rear Case: adım 2, 3 resimden 3.

    • Remove the marked 3mm screws.

    • Separate the two parts of the body of the camera slightly.

    • Make sure not to pull too hard because there are connector ribbons.

    • Detach the connector ribbons before fully separating the camera into two pieces.

    Düzenle

  4. Nikon COOLPIX P500 Rear Case Replacement: adım 3, 1 resimden 1.

    • Remove the labeled 3mm screws using a PH00 screwdriver.

    Düzenle

  5. Nikon COOLPIX P500 Rear Case Replacement: adım 4, 1 resimden 1.

    • Remove the brown metal plate.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

5 tane daha katılımcı ile

Kevin Scott

Üyelik tarihi: 01/22/15

517 İtibar

3 adet Kılavuz yazıldı

Rozetler: 15

+12 tane daha rozet

Ekip

Cal Poly, Team 19-10, Maness Winter 2015 Cal Poly, Team 19-10, Maness Winter 2015 üyesi

CPSU-MANESS-W15S19G10

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 1,013