Ana içeriğe geç

Giriş

This is a guide that demonstrates how to isolate the rear case of your camera from the rest of the device.

Parçalar

Hiçbir parça belirtilmedi.

  1. Electric shock is a huge risk if the battery is not removed while taking the camera apart. Press down and forward on the battery cover latch.
    • Electric shock is a huge risk if the battery is not removed while taking the camera apart.

    • Press down and forward on the battery cover latch.

    • Push the orange latch, in the direction of the arrow on it, to release the battery.

  2. Remove the marked 3mm screws. Separate the two parts of the body of the camera slightly. Make sure not to pull too hard because there are connector ribbons.
    • Remove the marked 3mm screws.

    • Separate the two parts of the body of the camera slightly.

    • Make sure not to pull too hard because there are connector ribbons.

    • Detach the connector ribbons before fully separating the camera into two pieces.

  3. Android Tamir Setleri

    A new screen or battery is one kit away.

    Hemen Alışveriş Yapın

    Android Tamir Setleri

    A new screen or battery is one kit away.

    Hemen Alışveriş Yapın
  4. Remove the labeled 3mm screws using a PH00 screwdriver.
    • Remove the labeled 3mm screws using a PH00 screwdriver.

  5. Remove the brown metal plate.
    • Remove the brown metal plate.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Kevin Scott

Üyelik tarihi: 22-01-2015

422 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 19-10, Maness Winter 2015 Cal Poly, Team 19-10, Maness Winter 2015 üyesi

CPSU-MANESS-W15S19G10

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 6

Son 30 Gün: 8

Her zaman: 709