Eşyalarını Tamir Et Topluluk Mağaza

Nikon CoolPix S5 Plastic LCD Screen Cover Replacement

Giriş

This guide is to be used to install the plastic LCD screen cover in the case that it becomes damaged or no longer functions properly due to overuse. A Phillips screwdriver will be needed to complete this installation.

Neye ihtiyacın var

  1. Nikon CoolPix S5 Plastic LCD Screen Cover Replacement, Back Cover: adım 1, 1 resimden 1.

    • Remove the wristlet by untying the strap.

    Düzenle

  2. Nikon CoolPix S5 Plastic LCD Screen Cover Replacement: adım 2, 1 resimden 1.

    • Open the SD/Battery cover.

    Düzenle

  3. Nikon CoolPix S5 Plastic LCD Screen Cover Replacement: adım 3, 2 resimden 1. Nikon CoolPix S5 Plastic LCD Screen Cover Replacement: adım 3, 2 resimden 2.

    • Remove the four screws adjacent to the SD/battery opening using a Phillips #00 screwdriver.

    Düzenle

  5. Nikon CoolPix S5 Plastic LCD Screen Cover Replacement: adım 4, 2 resimden 1. Nikon CoolPix S5 Plastic LCD Screen Cover Replacement: adım 4, 2 resimden 2.

    • Remove the side paneling of the camera by prying it off with your hands.

    Düzenle

  6. Nikon CoolPix S5 Plastic LCD Screen Cover Replacement: adım 5, 2 resimden 1. Nikon CoolPix S5 Plastic LCD Screen Cover Replacement: adım 5, 2 resimden 2.

    • Start on the wristlet side of the camera and use the #00 Phillips screwdriver to remove the two screws that hold the backplate in place.

    • Repeat the removal of the two screws on the other side of the camera.

    Düzenle

  7. Nikon CoolPix S5 Plastic LCD Screen Cover Replacement: adım 6, 2 resimden 1. Nikon CoolPix S5 Plastic LCD Screen Cover Replacement: adım 6, 2 resimden 2.

    • Separate the back faceplate from the rest of the camera.

    Düzenle

  8. Nikon CoolPix S5 Plastic LCD Screen Cover Replacement, Plastic LCD Screen Cover: adım 7, 2 resimden 1. Nikon CoolPix S5 Plastic LCD Screen Cover Replacement, Plastic LCD Screen Cover: adım 7, 2 resimden 2.

    • Press lightly on the outer surface of the plastic LCD screen cover in each corner.

    • The plastic LCD screen cover should pop out of the back plate.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

Josh Miller

Üyelik tarihi: 03/11/13

87 İtibar

3 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

Clemson, Team 12-5, Benson Spring 2013 Clemson, Team 12-5, Benson Spring 2013 üyesi

CLEM-BENSON-S13S12G5

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 6

Her zaman: 398