Giriş

This guide will outline how to remove a dead battery, as well as how to properly install a new one.

Aletler

Hiçbir alete gerek yok.

  • At the top of the camera, turn the Mode dial to OFF.

Yorum Ekle

Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible.
  • Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible.

  • To open the battery compartment, push the latch underneath the word BATTERY to the left.

Yorum Ekle

  • Lift the battery compartment cover and remove the old battery.

Yorum Ekle

  • Insert the new battery as shown on the underside of the compartment lid.

Yorum Ekle

  • Flip the battery compartment lid closed and push the latch to the right.

Yorum Ekle

  • Flip the camera so that the bottom rests on the table.

  • Turn the Mode dial to [A] to verify that the control panel shows a full power indicator.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Cory Layman

Üyelik tarihi: 04-10-2011

89 İtibar

3 adet Kılavuz yazıldı

Takım

UW Stout, Team 1-5, Zhou Fall 2011 UW Stout, Team 1-5, Zhou Fall 2011 üyesi

UWSTOUT-ZHOU-F11S1G5

5 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 6

Her zaman: 1,362