Giriş

Is your LCD screen not displaying anything or is displaying a corrupted image? Follow this guide to replace the LCD screen.

Parçalar

Hiçbir parçaya gerek yok.

Remove two 5 mm Phillips #000 screws on the right hand side of the camera located near the power button. Use of precision tweezers to help remove loosened screws is suggested.
  • Remove two 5 mm Phillips #000 screws on the right hand side of the camera located near the power button.

  • Use of precision tweezers to help remove loosened screws is suggested.

Yorum Ekle

Remove two 5 mm Phillips #000 screws near the audio/video inputs on the opposite side near the flash component. Remove two 5 mm Phillips #000 screws near the audio/video inputs on the opposite side near the flash component.
  • Remove two 5 mm Phillips #000 screws near the audio/video inputs on the opposite side near the flash component.

Yorum Ekle

Remove three 5 mm Phillips #000 screws on the bottom end of the camera. Remove three 5 mm Phillips #000 screws on the bottom end of the camera.
  • Remove three 5 mm Phillips #000 screws on the bottom end of the camera.

Yorum Ekle

Carefully detach the back side of the camera by lifting both ends, with moderate force wobble until loosened enough to remove.
  • Carefully detach the back side of the camera by lifting both ends, with moderate force wobble until loosened enough to remove.

Yorum Ekle

With the LCD screen facing towards you, flip the screen to the right. With the LCD screen facing towards you, flip the screen to the right.
  • With the LCD screen facing towards you, flip the screen to the right.

Yorum Ekle

Remove three 5 mm Phillips #000 screws located on the bracket. Hold the camera with the lens facing downward to prevent the bracket from falling off once all screws are removed. Hold the camera with the lens facing downward to prevent the bracket from falling off once all screws are removed.
  • Remove three 5 mm Phillips #000 screws located on the bracket.

  • Hold the camera with the lens facing downward to prevent the bracket from falling off once all screws are removed.

Yorum Ekle

Disconnect the ribbons that connect the LCD screen to the camera gently using precision tweezers or fingers. Disconnect the ribbons that connect the LCD screen to the camera gently using precision tweezers or fingers.
  • Disconnect the ribbons that connect the LCD screen to the camera gently using precision tweezers or fingers.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Emilio Mena

Üyelik tarihi: 14-01-2015

689 İtibar

4 adet Kılavuz yazıldı

Takım

UW Tacoma, Team 3-1, Rose Winter 2015 UW Tacoma, Team 3-1, Rose Winter 2015 üyesi

UWT-ROSE-W15S3G1

4 Üyeler

4 adet Kılavuz yazıldı

Bir Yorum

I love ifixit instructions so much more than youtube. These are so easy and straightfoward and I love how screw sizes are carefully specified.

Susan - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 5

Son 30 Gün: 22

Tüm Zamanlar: 1,331