Eşyalarını Tamir Et Topluluk Mağaza

Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement

Giriş

This guide describes the steps necessary to remove and replace the LCD Monitor Connecting Arm of a Nikon Coolpix L830 camera.

Neye ihtiyacın var

  1. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement, Back Casing: adım 1, 1 resimden 1.

    • Use a Phillips #000 screwdriver to unscrew the two 3.0mm Phillips screws located on the side of the camera with the HDMI port.

    • The HDMI port side will be on the left if you are looking at the back of the camera with the LCD monitor.

    • One screw is located under the gray flap.

    Düzenle

  2. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: adım 2, 1 resimden 1.

    • Unscrew the five 3.0mm Phillips #000 screws that are located on the bottom side of the camera.

    Düzenle

  3. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: adım 3, 1 resimden 1.

    • Unscrew the 4.0mm Phillips #000 screw located underneath the grey flap on the side of the camera with the "DC IN 5.0 V" marker.

    • This will be on the right if you are looking at the back LCD monitor side.

    • Unscrew the exposed 3.0mm Phillips #000 screw on the same side.

    Düzenle

  5. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: adım 4, 1 resimden 1.

    • Press the flash button to open the flash component.

    • Remove the 3.0mm Phillips #000 screw located directly in-between the two arms.

    Düzenle

  6. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: adım 5, 1 resimden 1.

    • Open the LCD monitor to reveal two 2.0mm Phillips screws.

    • Remove the 2.0mm Phillips #000 screws.

    Düzenle

  7. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: adım 6, 2 resimden 1. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: adım 6, 2 resimden 2.

    • Make sure to open the plastic grey flaps on either side of the camera before proceeding with this step.

    • Insert a plastic opening tool between the back and front surface components of the camera.

    • Wiggle the plastic opening tool backwards and forwards along the top edge until the back surface comes off.

    • Remove the back casing gently to not damage the LCD ribbon connector or inner camera components.

    Düzenle

  8. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: adım 7, 2 resimden 1. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: adım 7, 2 resimden 2.

    • Gently pull the LCD ribbon connector up to allow the back casing to be completely removed.

    Düzenle

  9. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement, LCD Connecting Arm: adım 8, 1 resimden 1.

    • On the inside of the back cover, remove the two 2.0mm Phillips screws surrounding the connecting cable.

    Düzenle

  10. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: adım 9, 1 resimden 1.

    • Gently pull the ribbon connector in order to remove the complete LCD Monitor Connecting Arm.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Alex Delony

Üyelik tarihi: 11/01/16

184 İtibar

1 Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

Baylor, Team 4-4, Williams Fall 2016 Baylor, Team 4-4, Williams Fall 2016 üyesi

BU-WILLIAMS-F16S4G4

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 473