Giriş
If the LCD monitor on your Nikon Coolpix L830 is corrupted or completely blank, replacement is necessary. Following these steps will allow you to replace the broken screen with a new one to allow complete monitor functionality to return.
Neye ihtiyacın var
-
-
-
Use a Phillips head P000 screwdriver to remove the four 3.0 mm Phillips screws on the back of the monitor.
FixBot'a Sor
-
-
-
Use a Phillips head P000 screwdriver to remove the two 3.0 mm Phillips screws on the hinge cover.
-
-
-
-
Remove the back cover of the LCD monitor with your hands or a plastic opening tool.
-
-
-
Use your thumb to gently pull the small flex ribbon wire connector from its socket.
-
Use your thumb to gently pull the wide flex ribbon wire connector from its socket.
-
-
-
Use a plastic opening tool to remove the front cover of the LCD monitor, allowing the monitor to be completely be released.
-
-
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.
Ekip
Baylor, Team 4-4, Williams Fall 2016 Baylor, Team 4-4, Williams Fall 2016 üyesi
BU-WILLIAMS-F16S4G4
3 Üyeler
30 adet Kılavuz yazıldı
