Giriş

If the battery is dead or the memory card is full, it must be changed or charged. In order to accomplish either they must be removed. This guide will show the reader how to simply remove either one.

Aletler

Hiçbir alete gerek yok.

Parçalar

  1. Slide the battery and memory card cover (located on the bottom of the camera) to release it.
    • Slide the battery and memory card cover (located on the bottom of the camera) to release it.

    Yorum Ekle

  2. To release battery you must slide the orange hatch, once doing so the battery will pop up.
    • To release battery you must slide the orange hatch, once doing so the battery will pop up.

    • Remove with tweezers or your fingers.

    Yorum Ekle

    • To release the memory card, simply push down on the memory card and it will pop up as the battery did.

    • You will be able to remove with your fingers.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Shauna

Üyelik tarihi: 05-04-2011

750 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 12-32, Maness Spring 2011 Cal Poly, Team 12-32, Maness Spring 2011 üyesi

CPSU-MANESS-S11S12G32

4 Üyeler

5 adet Kılavuz yazıldı

Bir Yorum

Thank you! If you're like me, the way you push the memory card registers as "in," not "down," but I got it out!

bonitakale - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 18

Son 30 Gün: 68

Her zaman: 16,860