Giriş

  1. You will need a #00 phillip's head screwdriver and a black spudger (or equivalent tool)

Parçalar

Hiçbir parçaya gerek yok.

Turn over camera to find 5 apparent screws.
  • Turn over camera to find 5 apparent screws.

Yorum Ekle

Remove all 5 screws from the bottom of the camera and store them carefully.
  • Remove all 5 screws from the bottom of the camera and store them carefully.

Yorum Ekle

  • Open battery door by sliding it in the direction of the arrow to reveal a hidden screw on the opposite side of orange lever. Remove this screw.

Yorum Ekle

  • Rotate camera to find side panel with lanyard attachment. Detach side panel by lifting bottom corner slightly with the spudger.

Yorum Ekle

  • Lift the back cover, being careful not to rip the orange cables between the camera and the back cover.

Yorum Ekle

  • With back cover lifted, lift the black flap that connects the ribbon to the motherboard with the spudger and carefully remove the back cover.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Ryan

Üyelik tarihi: 12-04-2011

131 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 18-24, Garner Spring 2011 Cal Poly, Team 18-24, Garner Spring 2011 üyesi

CPSU-GARNER-S11S18G24

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,166