Ana içeriğe geç

Giriş

The communication board sends information about the aperture and focus of the lens. If you are having trouble with focus or aperture, then there may be a problem with the communication board.

Parçalar

Hiçbir parça belirtilmedi.

  1. Nikon N2000 (F301) Communication Board Replacement, Lens Mount: adım 1, 1 resimden 1.
    • Use a 00 Phillips head screwdriver to remove the four screws from the lens mount.

  2. Nikon N2000 (F301) Communication Board Replacement: adım 2, 1 resimden 1.
    • Remove lens mount from the camera.

    • Be careful not to lose any of the three loose pieces that are under the lens mount.

  3. Nikon N2000 (F301) Communication Board Replacement, Communication Board: adım 3, 1 resimden 1.
    • Remove the three loose parts (spring, small rod, and metal ring) that were under the lens mount and put them aside.

    • Make sure you remember the orientation of the metal ring so that it is easier to put back in the device later.

  4. Nikon N2000 (F301) Communication Board Replacement: adım 4, 1 resimden 1.
    • Use 00 Phillips head screwdriver to remove the screw from the bottom of the front black case.

  5. Nikon N2000 (F301) Communication Board Replacement: adım 5, 3 resimden 1. Nikon N2000 (F301) Communication Board Replacement: adım 5, 3 resimden 2. Nikon N2000 (F301) Communication Board Replacement: adım 5, 3 resimden 3.
    • Use 00 Phillips head screwdriver to remove the screws from the top case (6 in all).

  6. Nikon N2000 (F301) Communication Board Replacement: adım 6, 1 resimden 1.
    • Remove the front case from the camera.

    • There is a black plastic ring in the case. Be sure not to remove it, as it can be difficult to put back.

  7. Nikon N2000 (F301) Communication Board Replacement: adım 7, 1 resimden 1.
    • Use a 00 Phillips head screwdriver to remove the screws from either side of the communication board.

  8. Nikon N2000 (F301) Communication Board Replacement: adım 8, 1 resimden 1.
    • Desolder the wires and remove them from the communication board.

    • Note: If you are unfamiliar with soldering techniques, click here for a guide.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Zachary Phillips

Üyelik tarihi: 08-04-2011

235 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 25-26, Garner Spring 2011 Cal Poly, Team 25-26, Garner Spring 2011 üyesi

CPSU-GARNER-S11S25G26

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 10

Son 30 gün: 38

Her zaman: 5,210