Eşyalarını Tamir Et Topluluk Mağaza

Nikon N80 Gear Belt for Film Winding Replacement

Giriş

Is the gear belt for film winding in your camera broken or has a tear? Try your hand at replacing it to make your camera work again. This guide will explain how to replace the gear belt in a Nikon N80/F80 Camera.

Neye ihtiyacın var

  1. Nikon N80 Gear Belt for Film Winding Replacement, Gear Belt for Film Winding: adım 1, 1 resimden 1.

    • Make sure the On/Off switch is in the Off position.

    Düzenle

  2. Nikon N80 Gear Belt for Film Winding Replacement: adım 2, 2 resimden 1. Nikon N80 Gear Belt for Film Winding Replacement: adım 2, 2 resimden 2.

    • Rotate the camera so the bottom plate is accessible.

    • Remove the seven 4.8mm screws on the bottom plate of the camera using a PH00 Phillips screwdriver.

    • Remove the bottom plate.

    Düzenle

  4. Nikon N80 Gear Belt for Film Winding Replacement: adım 3, 2 resimden 1. Nikon N80 Gear Belt for Film Winding Replacement: adım 3, 2 resimden 2.

    • Remove the eight 4.8mm screws holding on the metal plate.

    • Remove the metal plate.

    Düzenle

  5. Nikon N80 Gear Belt for Film Winding Replacement: adım 4, 2 resimden 1. Nikon N80 Gear Belt for Film Winding Replacement: adım 4, 2 resimden 2.

    • Gently remove the black, rubber gear belt.

    • Discard the old belt responsibly.

    • Place new belt on.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Maegan Viloria

Üyelik tarihi: 09/14/15

717 İtibar

5 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

CSU Fullerton, Team 1-7, Bruce Fall 2015 CSU Fullerton, Team 1-7, Bruce Fall 2015 üyesi

CSUF-BRUCE-F15S1G7

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 27

Her zaman: 1,332