Eşyalarını Tamir Et Topluluk Mağaza

Nikon N80 Lens Mount (aka Bayonet Mount) Replacement

Giriş

Is the lens mount in your camera damaged or broken? It might be time to replace it with a new one! This guide will explain how to replace the lens mount (also known as bayonet mount) in a Nikon N80/F80 Camera.

Neye ihtiyacın var

  1. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement, Lens Mount (aka Bayonet Mount): adım 1, 1 resimden 1.

    • Make sure the On/Off switch is in the Off position.

    Düzenle

  2. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement: adım 2, 1 resimden 1.

    • Place the camera so the lens is facing up.

    • If your camera has a lens on, remove it by pushing and holding the lens release button and turning the lens clockwise until it comes off.

    Düzenle

  4. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement: adım 3, 1 resimden 1.

    • Use a PH00 Phillips screwdriver to remove the five 4.8mm screws on the silver lens mount.

    Düzenle

  5. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement: adım 4, 1 resimden 1.

    • Remove the old lens mount and place the new one on.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Maegan Viloria

Üyelik tarihi: 09/14/15

717 İtibar

5 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

CSU Fullerton, Team 1-7, Bruce Fall 2015 CSU Fullerton, Team 1-7, Bruce Fall 2015 üyesi

CSUF-BRUCE-F15S1G7

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 12

Son 30 gün: 40

Her zaman: 1,953