Eşyalarını Tamir Et Topluluk Mağaza

Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement

Giriş

The water reservoir hanger is located on the left side of the brew basket and filter. This small component is crucial for making sure the water reservoir is secure and attached to the rest of the device. Follow this guide to replace the water reservoir hanger and resecure your water reservoir.

Neye ihtiyacın var

  1. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement, Water Reservoir Clip: adım 1, 2 resimden 1. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement, Water Reservoir Clip: adım 1, 2 resimden 2.

    • Remove single 6mm #1 Phillips head screw from the side of the unit and four 6mm screws from under the basket area.

    Düzenle

  3. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: adım 2, 2 resimden 1. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: adım 2, 2 resimden 2.

    • Gently pry the upper panel up from the unit.

    Düzenle

  4. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: adım 3, 1 resimden 1.

    • Inside the panel, remove the two 6mm #1 Phillips head screws. Remove and replace water reservoir clip as necessary.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

CJ Berg

Üyelik tarihi: 11/05/18

444 İtibar

4 adet Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

UMass Dartmouth, Team S5-G4, Gulbrandsen Fall 2018 UMass Dartmouth, Team S5-G4, Gulbrandsen Fall 2018 üyesi

UMASSD-GULBRANDSEN-F18S5G4

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 5

Son 30 gün: 6

Her zaman: 806