Eşyalarını Tamir Et Topluluk Mağaza

Ninja Coffee Bar CF080 Brewer Head Replacement

Giriş

This guide will show how to remove the brewer head from the coffee machine.

Neye ihtiyacın var

  1. Ninja Coffee Bar CF080 Brewer Head Replacement, Brewer Head: adım 1, 1 resimden 1.

    • Face the coffee machine in front of you.

    • Make sure that the coffee machine is unplugged.

    • Remove the glass carafe as it will not be needed.

    Düzenle

  2. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 2, 1 resimden 1.

    • Firmly grab the tab sticking out from the head of the brewer.

    Düzenle

  3. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 3, 3 resimden 1. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 3, 3 resimden 2. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 3, 3 resimden 3.

    • With little force, pull the tab of the brewer head in reverse direction.

    Düzenle

  4. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 4, 1 resimden 1.

    • Slide off the head in the direction away from the machine.

    • If the head does not come off smoothly by sliding, give a firm tug in the same direction.

    Düzenle

  6. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 5, 3 resimden 1. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 5, 3 resimden 2. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 5, 3 resimden 3.

    • Hold the head in the same position and lift it forward until the Ninja is facing upward toward the ceiling.

    Düzenle

  7. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 6, 1 resimden 1.

    • Now the brewer head is positioned to where you can seeing the bottom.

    Düzenle

  8. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 7, 2 resimden 1. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 7, 2 resimden 2.

    • Remove the screw with a Phillips #1 screwdriver.

    • Use Phillips #1 screwdriver.

    • Along will come a small black screw cover and spring

    Düzenle

  9. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 8, 1 resimden 1.

    • Twist the black lid on top clockwise until it is completely detached.

    Düzenle

  10. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 9, 1 resimden 1.

    • With the black upper lid detached, a smaller black cover can be removed without effort.

    Düzenle

  11. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 10, 2 resimden 1. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 10, 2 resimden 2.

    • Remove the 6 screws from the seal with a Phillips #1 screwdriver.

    Düzenle

  12. Ninja Coffee Bar CF080 Brewer Head Replacement: adım 11, 1 resimden 1.

    • Once all screws are detached from the brewer head, it will be separated into two pieces leaving the filter.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

Elizabeth Nguyen

Üyelik tarihi: 09/11/17

416 İtibar

3 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

CSU Fullerton, Team S1-G1, Bruce Fall 2017 CSU Fullerton, Team S1-G1, Bruce Fall 2017 üyesi

CSUF-BRUCE-F17S1G1

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 8

Her zaman: 986