Eşyalarını Tamir Et Topluluk Mağaza

Ninja Professional BL610 Button Replacement

Giriş

Use this guide to replace the buttons on your device.

Neye ihtiyacın var

  1. Ninja Professional BL610 Button Replacement, Button: adım 1, 1 resimden 1.

    • Remove six screws (12mm long, 6mm head diameter) from bottom of the blender using a Phillips #2 screwdriver.

    Düzenle

  2. Ninja Professional BL610 Button Replacement: adım 2, 1 resimden 1.

    • Remove six screws (12mm long, 6mm head diameter) from component housing using Phillips #2 screwdriver.

    Düzenle

  4. Ninja Professional BL610 Button Replacement: adım 3, 1 resimden 1.

    • Remove five screws from circuit board using Phillips #2 screwdriver.

    Düzenle

  5. Ninja Professional BL610 Button Replacement: adım 4, 1 resimden 1.

    • Once the screws are removed, lift the circuit board to access the back.

    Düzenle

  6. Ninja Professional BL610 Button Replacement: adım 5, 1 resimden 1.

    • Locate the button you wish to replace and note its position on the opposite side of the circuit board. They are marked with the letters ¨sw¨ on the circuit board.

    Düzenle

  7. Ninja Professional BL610 Button Replacement: adım 6, 1 resimden 1.

    • Using a soldeing gun and soldering wick,desolder the for connection points and remove the button.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Rosniel Castro

Üyelik tarihi: 09/27/17

482 İtibar

4 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

USF Tampa, Team S14-G3, Boczar Fall 2017 USF Tampa, Team S14-G3, Boczar Fall 2017 üyesi

USFT-BOCZAR-F17S14G3

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 162